This is new technology--a rechargeable magnetic beacon. Now you can operate a magnetically mounted beacon without having to run a cable out the window. The unit has an integral on/off switch with a smart battery status LED indicator and a combined magnet and suction cup mounting.
Light source: 12 x 3W 3535 high power LEDs
3 flash patterns—single flash, dual flash, rotate
Integral on/off switch and smart battery status LED indicator
E-approved to ECE R65 when running from external power
Battery: 18650 li-ion battery, 7.4V/2200MA
Charging voltage: 12-24V DC or 240V AC
Charging Time: 3 hours
Run time: 3 hours
Waterproof rating: IP65
Mounting: Combined magnet and suction cup
Size: 140mm (h), 128 mm (dia)
Charging cable stretches to maximum length of 3 metres
Not for high speed operation. 100kmh max vehicle speed
The CE mark indicates conformity with health, safety, and environmental protection standards for products sold within the European Economic Area.
Approval for use as lighting or a light signalling device on public roads in the EU, plus several other countries including Australia and New Zealand. Marking in the lens: circle enclosing the letter E plus a figure indicating the country issuing the type-approval for the light and followed by the number of approval.
ECE R65 (R65) is a United Nations standard for beacons, light bars and other vehicle warning lamps, designed to ensure that key standards governing light output, light dispersion, flash frequency and colour are met. Cold start, heat resistance and water ingress are also measured under the R65 standard.
Anywhere a magnetically mounted beacon might be used but with the feature of highly convenient cordless operation and easy portabilty.
To continue to download files, you must agree to the terms and conditions of use
Esko Limited own all intellectual property rights in the images and other
on this website. You may not copy, download or otherwise use any images or
Esko Limited (Esko) are the owners of all rights, title and interest in
to the images and any other content made available to download,
all trade marks featured in any such images or content.
Images and any other content may only be used or re-published in
with fair promotional representation of the relevant Esko products.
Images must be printed and/or reproduced in a way that maintains their
overall quality and resolution.
Images must remain as provided to you by Esko and you must not make any
changes to the images.
You will provide Esko with information about your use of the images and
other content as required by Esko from time to time. Esko may request
you change how you are using any images or other content, and you agree
promptly comply with that request.
Esko has the right to require users to take down or withdraw from
publication any images which it deems inappropriately used, in its sole
discretion, and you agree to promptly comply with any such requirement.
If specifications, colours, packaging, etc of Esko products are changed,
if Esko otherwise considers it desirable or necessary, Esko has the
require users to remove the images and, if applicable, replace them with
Esko does not provide any warranties or make any representations about
images or content made available on this website, and your use of the
or other content is at your own risk.