Esko ChemGard 806 Gauntlet
ChemGard green 15mil nitrile diamond-grip 33cm gauntlet, flocklined liner
4102X- AJKLNOT
Select your options
- Anti-slip diamond grip pattern
- Flocklined for no-sweat comfort
- Tough abrasion resistant nitrile rubber
- Specially formulated for improved dexterity
- Sizes S-3XL
Click to download Esko's chemical resistance glove selection guide.
Recommendations are advisory. The suitability of a product for a specific application must be determined by testing by the user.
4102XEN 388:2016
Updates the EN 388:2008 standard. It continues the previous test’s methods with some alterations including a change to the way the coup cut test is carried out (the second figure giving the coup cut resistance rating may be expressed as 'X' if the glove is not tested under the coup test or if the rolling blade becomes blunt before the test is completed). It adds a fifth letter (A to F, with F being highest) for cut resistance using the sliding blade TDM test and a sixth letter to indicate impact protection, expressed as 'P' for pass. If the glove is not designed to provide impact protection the sixth figure is left out, or sometimes 'F' (fail).
EN 1186
Glass/fork symbol gives traceability and identification of materials intended to come into contact with food. Confirms that these products will not contaminate food with hazardous substances.
FDA 21
Overarching regulations for production, testing, labelling and advertising of food and drugs within the United States.
AJKLNOTEN 374-1
Indicates that the product meets permeation standards for protective gloves, with permeation resistance of (Type A) at least 30 minutes to 6 test chemicals, (Type B) at least 30 minutes to 3 chemicals and (Type C) at least 10 minutes to 1 chemical. Letters under the shield identify the chemicals.
EN 374-2
Indicates that the product meets penetration standards for protective gloves, against penetration by dangerous chemicals and micro-organisms. A sample glove shall not leak water or air when tested for closures, porosity, seams, pinholes, leaks or imperfections of the glove by either inflating with air or filling with water.
EN 374-4
Measures the glove’s resistance to degradation by chemical exposure—any flaking, swelling, disintegration, embrittlement, hardening, softening, etc—by testing the force required to puncture the glove material after continuous contact with a challenge chemical.
EN 374-5
Tests the glove for safety in risks of contact with micro-organisms—bacteria, fungi
- Painting
- Laboratory
- Horticulture
- Environmental waste
- Automotive
- Food Processing
Pack quantity/MOQ: 12 pairs
Carton quantity: 120 pairs
Carton quantity: 120 pairs
Esko ChemGard 806 Gauntlet
Product Code: E806
To continue to download files, you must agree to the terms and conditions of use
agreement.
Esko Limited own all intellectual property rights in the images and other content on this website. You may not copy, download or otherwise use any images or other website content except by agreement with the following terms of use:
- Esko Limited (Esko) are the owners of all rights, title and interest in and to the images and any other content made available to download, including all trade marks featured in any such images or content.
- Images and any other content may only be used or re-published in connection with fair promotional representation of the relevant Esko products.
- Images must be printed and/or reproduced in a way that maintains their overall quality and resolution.
- Images must remain as provided to you by Esko and you must not make any changes to the images.
- You will provide Esko with information about your use of the images and other content as required by Esko from time to time. Esko may request that you change how you are using any images or other content, and you agree to promptly comply with that request.
- Esko has the right to require users to take down or withdraw from publication any images which it deems inappropriately used, in its sole discretion, and you agree to promptly comply with any such requirement.
- If specifications, colours, packaging, etc of Esko products are changed, or if Esko otherwise considers it desirable or necessary, Esko has the right to require users to remove the images and, if applicable, replace them with new images.
- Esko does not provide any warranties or make any representations about the images or content made available on this website, and your use of the images or other content is at your own risk.
Agree
