Skip to content

Esko Razor X323 Fingerless Hi-Vis Green Cut 3 Glove


Razor X323 Digit Hi-Vis Green UHMWPE Cut Level 3 Glove, Fingerless, PU Coat

  • EN 388:20164342B
  • ANSI 105-2016 (A2)
  • Cut Resistant CUT 3
  • Hi-Tech Yarn Wrapping
  • Hi-Vis
  • Touch Screen

Select your options

  • Razor Digit fingerless glove with open thumb, fore and index fingertips, gives excellent touch dexterity for intricate work
  • Enables accurate use of touchscreen devices
  • Hi-Vis cut resistant liner knitted from high-performance UHMWPE combined with stretchy spandex/polyester
  • Advanced yarn wrapping technology, maximising user comfort with a softer liner and less hand fatigue
  • Silicone-free PU foam coating—no risk of silicone contamination prior to painting metal parts
  • Certified to protect to latest European and American standards, Cut Level 3 (B)
  • Sizes 8–11

Note that fingertips are not cut protected—these gloves are designed to provide touch sensitivity while maintaining cut protection to the palm and back of hand for specialist uses. Where full cut protection is required please select the standard E460 glove.

EN 388:20164342B

EN 388:2016

Updates the EN 388:2008 standard. It continues the previous test’s methods with some alterations including a change to the way the coup cut test is carried out (the second figure giving the coup cut resistance rating may be expressed as 'X' if the glove is not tested under the coup test or if the rolling blade becomes blunt before the test is completed). It adds a fifth letter (A to F, with F being highest) for cut resistance using the sliding blade TDM test and a sixth letter to indicate impact protection, expressed as 'P' for pass. If the glove is not designed to provide impact protection the sixth figure is left out, or sometimes 'F' (fail).

ANSI 105-2016 (A2)

ANSI 105-2016 (A2)

The American ANSI cut protection classification for gloves. The numeral represents a ten-point scale, 0 to 9 (lowest to most cut resistant), based on the weight in grams needed to cut through the glove material with 20 mm blade travel in the TDM test.

  • Electrical
  • Assembly
  • Automotive
  • Trades
  • Construction
  • Warehousing and packaging
  • Machine operating
  • Engineering
  • Food processing
  • Any application needing cut protection & high levels of touch sensitivity
Sizes available: 7(S)–11(2XL) Pack quantity/MOQ: 12 pairs Carton quantity: 120